Thursday, 26 September 2013

How to Update ZOPO C2 to Android 4.2 OS

How to Update ZOPO C2 to Android 4.2 OS

--Download follows file to your PC
1.Firmware:Download ZOPO C2 ROM(android 4.2-130422)
2.SP Flash Tool (Latest version:4.2)
PS:If you do not know how yo use the SP Flash Tool,please here to learn:[TUT]MTK Android (Sp flash tool ) tutorial
Make sure that you have MediaTek DA USB VCOM drivers installed.

--First of all,extract the firmware entire contents of the zip file ,after open SP Flash Tool,
then click Scatter-loading button to load the correct scatter file
(MT6575_Android_scatter_emmc.txt or "MT6589_Android_scatter_emmc.txt", depending on which phone you have)
for your device and ignore any message that may appear.

zopo c2

--Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.

Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
Very important warning: Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone.
After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore
by the computer) and there is no way to recover it.

No comments:

Post a Comment